Panasonic HX-DC10 - Audio Recording and Playback

62 VQT3P12
ADVANCED OPERATION/SHOOTING
Audio recording and playback
k Recording
1 Select <, and press the SET
button.
h The audio recording mode is
enabled.
h The menu display is canceled if
the MENU button is pressed.
2 Press the [@] button.
h Audio recording begins.
h During audio recording, <
appears in the LCD monitor.
h It is not necessary to continue
pressing the [@] button while
recording.
h When the remaining recording
time available for the currently
recording video becomes 30
seconds or less, a countdown of
the remaining recording time
appears on the display.
3 End the audio recording.
h Press the [@] button again to stop recording.
h The elapsed recording time returns to 000:00:00 each time recording
is stopped.
HINT
You can capture a photo during an audio recording
i Press the [O] button during audio recording to capture a [ photo.
Maximum audio recording time?
i
When the recording mode setting is set to audio < and the recording exceeds
about 5 hours, the recorded file is saved and the audio recording ends.
i If you close the monitor unit, audio recording stops and the camera
switches to the standby mode.
340 014:59:15
340 014:59:15
16 M
-
S
340 014:59:15
Remaining recordable time
000:00:06
000:00:06
0.3 M
000:00:06
Elapsed recording time
Turns red