18 VQT4D20
Inserting/removing an SD card
Caution:
Check that the status indicator has gone off.
1 Open the battery/card cover.
2 Insert (remove) the SD card into (from) the card slot.
≥ Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the centre of the SD card and then pull it straight out.
When using an SD card not from Panasonic, or one previously used on
other equipment, for the first time on this unit, format the SD card.
(l 31) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Status indicator A
≥ When this unit is
accessing the SD card or
built-in memory, the
status indicator lights up
red.
Simplified-HX-DC2EG-VQT4D20_mst.book 18 ページ ２０１２年１月５日 木曜日 午前１１時５１分
To Next Page
Loading...
