24 VQT4D20
≥ Before turning on the unit, remove the lens cap.
≥ Still pictures are recorded to SD card if one is inserted. If no SD card is
inserted, the still pictures are recorded to the built-in memory.
1 Open the LCD monitor.
2 (For auto focus only)
Press the button halfway.
A Focus area (area inside brackets)
3 Press the button fully.
≥ If you continue to hold down the button, you can check the
recorded image on the LCD monitor.
Basic
Recording still pictures
F3.5
F3.5
1/30
1/30
Simplified-HX-DC2EG-VQT4D20_mst.book 24 ページ ２０１２年１月５日 木曜日 午前１１時５１分
To Next Page
Loading...
