28 VQT3P46
SETUP
2 Insert the battery pack, then replace the battery cover.
h It is possible to insert the battery incorrectly, so please pay particular
attention when inserting that it is correctly oriented.
<To remove the battery pack...>
h Be sure the turn off the camera by pressing the power button until the
status indicator (page 24) turns off before removing the battery pack.
Battery pack
Connector markings
4 Close
and slide
shut
3 Insert the battery pack while
matching the connector markings.
5 Push the battery cover lock to
the left to lock it.
The coloured label is visible
when the battery cover lock is
not completely closed. Be sure
to close the lock completely so
that the coloured label is not
visible.
Coloured label
To Next Page
Loading...
