Panasonic HX-WA30 - Basic Operation: Powering the Unit On and Off

VQT4X11 31
Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.
Preparation
Turning the unit on/off
To turn off the unit
Hold down the power button until the LCD monitor goes off.
≥ Pressing the power button for a short time sends the unit into
Standby Mode.
HX-WA30EBEGEP-VQT4X11_mst.book 31 ページ ２０１３年１月２３日 水曜日 午後１時３１分