VQT4X11 47
The unit can record underwater at depths of down to 10 m ( ) /
5 m ( ). (for periods within 60 minutes)
When recording underwater, set [SCENE MODE] to (UNDER
WATER). The colour balance and audio recording will be suitable for
recording underwater.
1 Press the REC/ button to change to recording
mode.
2 Select the menu. (l 39)
≥ When [SCENE MODE] is set to (UNDER WATER), [Before using
the unit under water] and [Maintenance after use in water] are
displayed. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
≥ After use underwater, wash the unit in fresh water and dry well. (l 14)
≥ Do not use the Under Water Mode except when recording underwater.
Basic
Recording underwater
Before recording underwater, be sure to read “(Important) About
the Waterproof/Dustproof and Anti-shock Performance of this
unit” (page
9
to
17
) and to use the camera correctly. Incorrect use
may result water entering the unit and malfunction.
[MENU]: # [SCENE MODE] # [ (UNDER WATER)]
1
HX-WA30EBEGEP-VQT4X11_mst.book 47 ページ ２０１３年１月２３日 水曜日 午後１時３１分
To Next Page
Loading...
