VQT4X11 35
≥ Still pictures are recorded to SD card if one is inserted. If no SD card is
inserted, the still pictures are recorded to the built-in memory.
1 Open the LCD monitor.
2 Press the REC/ button to change to recording
mode.
3 (For Auto Focus only)
Press the button halfway.
A Focus area (area inside brackets)
4 Press the button fully.
≥ If you continue to hold down the button, you can check the
recorded image on the LCD monitor.
Basic
Recording still pictures
F2.8F2.8F2.8
1/301/301/30
HX-WA30EBEGEP-VQT4X11_mst.book 35 ページ ２０１３年１月２３日 水曜日 午後１時３１分
To Next Page
Loading...
