1.2 Making Calls
26 User Manual
To call with one touch
Using an Account Code (Account Code Entry)
You may give a specified account code to extension users and check their telephone usage. You can specify
an account code for each client and check the call duration.
• To start monitoring another PBX extension after customising an NDSS button, go off-
hook, press the NDSS button, and go on-hook.
The NDSS button light will show the current status as follows:
Off: The extension is idle.
Red on: The extension is busy.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
• A Panasonic proprietary telephone extension user can enter an account code during a
conversation and when hearing reorder tone after the other party hangs up.
• Account codes may use the digits "0" through "9".
• If you enter the wrong code, press the " " key and re-enter the account code.
PT and SLT
PT/PS
Off-hook. Press
NDSS
.
Talk.
(NDSS)
PT/SLT/PS
Enter
#
.
Off-hook.
account code
Enter
account code
(max. 10 digits).
Press
Account
or
enter
49
.
Dial
outside
phone number
.
outside
phone
no.
Seize outside line before
entering outside phone number.
OR
94
(Account)
D.Tone
To Next Page
Loading...
