Setting the Clock Setting the Timer
Press the Dial to confirm the
selection.
Press the Dial to confirm the
selection.
NOTES:
1. To reset the clock, repeat
steps.
2. The clock will retain the
time of day as long as the
oven is plugged in and
electricity is supplied.
3. The clock is a 12-hour
display.
2
4
3
5
With the oven NOT cooking,
tap Timer/Clock twice.
1
1
Tap Timer/Clock once.
2
Set desired amount of time by
turning the Dial.
(up to 1 hour 30 minutes)
Press the Dial to start.
Time will count down without
oven operating.
To Use as a Kitchen Timer
Select the hour by turning the
Dial.
Select the minute by turning
the Dial.
3
1
Tap Timer/Clock once.
Set the desired cooking
program, by entering cooking
method and time required.
(up to 2 power stages)
Example:
After Set 2 power stages.
3
2
4
Set the standing time by
turning the Dial.
(up to 1 hour 30 minutes)
Press the Dial to start.
Cooking will start. After
cooking, standing time will
count down without oven
operating.
Setting a Standing Time
22
Operation (continued)
F0003CM50CP_Eng_审查.indd 22 2023/3/30 12:47:33
To Next Page
Loading...
