Auto Menu Programs (No. 2-12, 14-29)
This feature allows you to set some ordinary menus with di erent Serving/Weights. It will cook automatically without setting power
and time. Select the category of food and then just enter the Serving/Weights. Do not include the weight of any added water or the
container weight.
Tap Auto once or using the
Dial. (see page 36)
1
2
3
Press the Dial to confirm the
selection.
Press the Dial to start
preheating.
"PREHEAT" will scrolls across
display window once then a
"P" will appear in the display
window.
When preheating is completed,
the oven will beep and
"P END" will display in the
display window.
Then open the door and place
the food inside.
4
5
Select the food category by
turning the Dial.
Select the serving/weights by
turning the Dial.
39
Operation (continued)
NOTES
1. For menu No.2 , please skip
step 2.
2. Step 5 is only available for
menu No.12.
3. For menu 22, please skip
step 4.
4. If "HOT INSIDE WAIT"
appear in the display
window, the oven
temperature is too high
from previous use and
an auto program can not
be set. Cooking mode
and time may still be set
manually.
5. When " " is blinking, fill
the water tank.
6. If during operation the
water tank becomes
empty, the oven will stop
operation. The prompt in
the display will ask you to
re-fill the water tank. After
re-filling the water tank
and positioning back in the
oven, press Dial. The oven
will not continue cooking
until the water tank has
been re-filled and Dial
pressed.
Guidelines
1. The auto menu programs
must only be used for
foods described.
2. Only cook foods within the
weight ranges described.
3. Always weigh the food
rather than relying on
the package weight
information.
4. Always use the Grill Tray as
indicated.
5. For larger weights on the
auto steam programs
chicken breasts and rice,
it will be necessary to re-
fill the water tank during
cooking.
6. Do not cover foods on the
auto steam programs.
7. The temperature for frozen
food is assumed to be
–18 °C (0°F ) to –20 °C
(–2°F). The temperature of
chilled food is assumed to
be +5°C (41°F) to
+8 °C (46°F) (refrigerator
temperature).
8. Most foods benefit from a
standing time after cooking
on an auto program, to
allow heat to continue
conducting to the centre.
9. To allow for some
variations that occur in
food, check that food is
thoroughly cooked and
piping hot before serving.
10. When you select an
automatic program,
symbols will appear in
the display to show the
cooking mode that will be
used and if the Grill tray is
needed.
6
Press the Dial to Start.
The cooking program will start
and the time in the display will
count down.
No.12 only
F0003CM50CP_Eng_审查.indd 39 2023/3/30 12:47:47
To Next Page
Loading...
