F4. Cavity CleaningF3. System Cleaning
2
Select F4. Cavity Cleaning by
turning the Dial.
4
Press the Dial to confirm the
selection.
Press the Dial to start.
The program will run for
approx. 29 minutes.
5
3
The first stage of this program
cleans the system with a citric
acid solution. The second stage
runs water through the system
to rinse the pipes.
Select F3. System Cleaning by
turning the Dial.
3
Press the Dial to confirm the
selection.
4
Press the Dial to start.
The cooking time appears
in the display window and
begins to count down.
44
NOTES:
1. When " " appears in the
display, run the "system
cleaning" program.
2. If the system cleaning
program is not used
regularly, the pipe will get
blocked and the steaming
performance will be less
effective.
3. Do not remove the drip tray
during the system cleaning.
4. Empty the drip tray and
rinse with running tap
water after the program has
finished.
NOTES:
1. Fill the tank with water
before using.
2. After cleaning, open the
door, wipe with a damp
cloth and empty the drip
tray.
Tap Cleaning once or using
the Dial. (see page 36)
1
Tap Cleaning once or using
the Dial. (see page 36)
2
This feature is available when the cavity is built up with fat or
grease (20 minutes is needed).
Operation (continued)
Make a solution
of 16 g (0.5 oz.)
citric acid and
200 ml (¾ cup) of water, add
the solution to the water tank.
Ensure drip tray is empty.
After the
program has
paused, empty
the drip tray and fill the water
tank with water (to max level).
1
6
Press the Dial to start.
The program will run for
approx. 1 minute. Empty the
drip tray after the program has
finished.
7
F0003CM50CP_Eng_审查.indd 44 2023/3/30 12:47:51
To Next Page
Loading...
