Setting the Timer (continued)
NOTES:
1. If the oven door is opened
during Kitchen Timer,
Standing Time, Delay Start,
the time in the display
window will continue to
count down.
2. Standing Time and
Delay Start can not be
programmed together
with auto programs, Bake
and Combo 3, 4. This is
to prevent the starting
temperature of food from
rising before defrosting or
cooking begins. A change is
starting temperature could
cause inaccurate results.
3. When using Standing time
or Delay Start, it’s up to 2
power stages.
4. If the programmed stand
time exceeds one hour,
the time will count down
in units of minutes. If less
than one hour, the time
will count down in units of
seconds.
5. An “H” will appear in the
display to denote hours.
NOTES:
1. This function is only available for Microwave, Broil, Bake,
Steam, Combination and Timer functions and it is not
available for Auto programs.
2. The Add Time function is only available within 1 minute after
cooking.
3. The Add Time function can be used after the 3-stage cooking.
The power level is the same as the last stage.
Add Time
Press the Dial to start.
Time will be added. The time in
the display window will count
down.
2
After cooking, turn the Dial to
select Add Time function.
This feature allows you to add cooking time at the end of
previous cooking.
1
3
Tap Timer/Clock once.
Set the desired cooking
program, by entering cooking
method and time required.
(up to 2 power stages)
1
4
Press the Dial to start.
Delayed time will count down
without oven operating. Then
cooking will start.
2
Setting Delay Start
Set desired amount of delay
time. (up to 1 hour 30 minutes)
Modes Maximum cooking time
Microwave (1000 W)
Microwave (Keep Warm)
Steam
Combo 2
30 minutes
Other microwave powers,
Combo 1
Broil
Bake 100-220 °C (215-425 °F)
Timer
1 hour and 30 minutes
Combo 3
Combo 4
1 hour
Bake 30-90 °C (85-195 °F) 9 hours
23
Operation (continued)
F0003CM50CP_Eng_审查.indd 23 2023/3/30 12:47:34
To Next Page
Loading...
