Panasonic KV-S2046C

Error
catego-
ry
Scanner Status message Cause Remedial action
— *** Caution ***
The front reference plate may
need to be cleaned.
Please clean the front refer-
ence plate.
The reference plate (F) is dirty.
(For KV-S7065C only)
Clean the front reference plate.
— *** Caution ***
The back reference plate may
need to be cleaned.
Please clean the back refer-
ence plate.
The reference plate (B) is dirty.
(For KV-S7065C only)
Clean the back reference plate.
— *** Caution ***
The scanner's image sensor
cover is dirty and requires rou-
tine cleaning.
The image sensor cover is
dirty.
(For KV-S4085CW,
KV-S4085CL, KV-S4065CW,
KV-S4065CL, KV-S3065CW,
and KV-S3065CL only)
Clean the image sensor cover.
— Scanner is not connected.
1. The scanner is not connec-
ted.
2. The scanner’s power has
not been turned on.
3. The computer was started
up before the scanner was
not ready. (with SCSI con-
nection)
1. Connect the scanner, turn
its power on, and restart
the computer.
2. Turn on the scanner’s pow-
er, and restart the comput-
er.
3. Restart the computer.
— The inside of the scanner is
dirty, and requires routine
cleaning. To insure reliable
scanning quality, open the
scanner's door, and carefully
clean the scanner's conveyor
and scanning glass section.
The inside of the scanner is
dirty, and requires routine
cleaning.
(For KV-S1025C and
KV-S1020C only)
1. Open the scanner’s door.
2. Clean the scanner’s con-
veyor and scanning glass
section.
—: No error code is displayed.
32 User Utility Reference Manual