Panasonic KV-S4065CW User Manual (English)

Other manuals for Panasonic KV-S4065CW

Operating Manual87 pages

Service Manual20 pages

Reference Manual40 pages

Installation Manual24 pages

Questions and Answers:

J
Jared SanchezAug 20, 2025
What to do if my Panasonic Scanner is not recognized by computer?
- W
  Wesley HayesAug 20, 2025
  If your Panasonic Scanner isn't being recognized by your computer, there are several potential causes: * Ensure the USB cable is correctly connected. * The software might not be installed correctly. In this case, uninstall the software and then reinstall it. * The USB interface of your computer may not be installed correctly. Verify this using the device manager’s property. * If you are using a USB hub, try connecting the scanner directly to the computer instead. * The USB cable itself might be faulty. Try using the included USB cable or a certified Hi-speed USB 2.0 cable. * The scanner may have entered Standby mode. Restart it by pressing any button for more than 1 second.
C
carpenterrichardAug 22, 2025
Why the ready indicator does not light on my Panasonic Scanner?
- B
  Brooke MatthewsAug 22, 2025
  If the ready indicator on your Panasonic Scanner doesn't light up when you turn on the power switch: * Make sure the power cord is firmly plugged in. * There may be a problem with the power supply. Disconnect the unit from the electric outlet and call for service.
J
John GallowayAug 25, 2025
How to open the front door of Panasonic KV-S4065CW Scanner?
- R
  racheldixonAug 25, 2025
  If the front door of your Panasonic Scanner cannot be opened, the screw is not loosened. Open the pre-imprinter door and loosen the screw.
M
Miss Tracy OrtegaAug 26, 2025
What to do if my Panasonic KV-S4065CW is not recognized or not functioning correctly?
- K
  Kimberly HughesAug 26, 2025
  If your Panasonic Scanner is not being recognized by your computer or isn't functioning as expected, there are several potential causes: * Ensure the USB cable is correctly connected. * If connected via a USB hub, connect the scanner directly to the computer. * Try using the included USB cable or a certified Hi-speed USB 2.0 cable. * Verify that the USB interface of your computer is correctly installed using the device manager’s property. * If the scanner has entered Standby mode, restart it by pressing any button for more than 1 second. * If the software isn't installed correctly, uninstall it and then reinstall it.
J
Jared MorganAug 27, 2025
Why does my Panasonic Scanner have frequent paper jams?
- C
  changjohnAug 28, 2025
  If your Panasonic Scanner frequently experiences paper jams, consider the following: * Ensure the paper thickness mode is appropriate for the documents you're scanning. Change the paper thickness mode if needed. * Smooth out any wrinkles on the document. * Realign the document correctly. * Clean the rollers. * Make sure that the document set on the hopper does not exceed the limit mark on the document guides.
M
Matthew HamptonAug 31, 2025
Why are there vertical lines on my scanned documents from my Panasonic KV-S4065CW?
- M
  Maria NguyenAug 31, 2025
  If vertical lines appear on the scanned documents from your Panasonic Scanner, it is likely that the image sensor covers are dirty. Clean the image sensor covers (F and B).
K
Kristen NelsonSep 2, 2025
Why is the scanned image from my Panasonic KV-S4065CW Scanner skewed?
- J
  Jennifer CollinsSep 2, 2025
  If the scanned image from your Panasonic Scanner is skewed, ensure that the document guides are properly adjusted to the size of the document. It is also important to make sure that the document to be scanned is not set slanted on the hopper. If right and left sides of the document to be scanned are not the same in height, because of curling or folding, flatten the document and load it again after reducing the pages.
T
Timothy GreenSep 4, 2025
Why do dark spots or noise appear on the scanned documents from my Panasonic KV-S4065CW Scanner?
- H
  hooperscottSep 4, 2025
  If dark spots or noise appear on the scanned documents from your Panasonic Scanner, the image sensor covers are likely dirty. Clean the image sensor covers (F and B).
N
nsmithSep 6, 2025
Why is the scanning density uneven on my Panasonic Scanner?
- D
  Dawn BishopSep 6, 2025
  If the scanning density is uneven on your Panasonic Scanner, it could be due to dirty image sensor covers. Clean the image sensor covers (F and B). Another possible cause is the quantity distribution of light varies, in this case adjust shading.
E
Ethan VaughnSep 8, 2025
Why is the scanned document from my Panasonic KV-S4065CW Scanner blank?
- K
  Karina BowmanSep 8, 2025
  If the scanned document from your Panasonic Scanner is completely blank, it's possible that the document was loaded upside down. Load the document correctly.

Panasonic KV-S4065CW Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	297 x 432 mm
Optical scanning resolution	- DPI
Scanner type	Sheet-fed scanner
Sensor type	CIS
Daily duty cycle (max)	30000 pages
Auto document feeder (ADF) input capacity	300 sheets
Minimum scan area (ADF)	48 x 70 mm
Auto Document Feeder (ADF) media weight	20 - 157 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	0 - 40 °C
Operating temperature (T-T)	15 - 30 °C
Storage relative humidity (H-H)	10 - 80 %
Operating relative humidity (H-H)	20 - 80 %
Scan speed (ADF, A4)	80 ppm
Media thickness (imperial)	0.001 \