11. T
urn ON the unit's power (page 32).
• The Ready LED (Green) will flash and then turn on.
• If the hardware wizard appears, follow the on-screen instructions to complete installation.
• When turning on the unit's power for the first time, select the language used on the LCD using
or
of the cursor button, and then press the Enter button ( ) to complete your selection.
• Y
ou can change the language used on the LCD. For details, see "6.6 Changing the language used on
the LCD" (page 38).
Notice
• When the feed tray is closed and the unit's power is turned on, the feed tray will open
automatically. Pay attention that your fingers or anything do not get pinched.
4.3 Installing the Unit
18
To Next Page
Loading...
