8.5.3. Storing the Number from the Redial/Caller List into the Phonebook
· To exit the operation, press any time.
*1 If there is no item stored in the redial/caller list, the display shows
.
*2 If you need correction, press
RIGHT or LEFT to move cursor then clear a character by pressing CLEAR, and/or enter digits.
Digits are cleared or added to the left of the flashing digit.
8.5.4. Hot Key (: Speed Dial)
You can assign the dialling buttons 1 through 9 as hot keys. You can choose 9 phone numbers from the phonebook.
· To exit the operation, press any time.
*1 If there is no item stored in the phonebook, the display shows
.
*2 The number is flashing if the dialling button is already assigned as a hot key.
*3 Phonebook registration will be remained even hot key registration is cleared.
25
KX-TCD4 10RUM / KX-TCD410RUS / KX-TCD412RU M / KX-TC D412RUS / KX-A141RUM / KX-A141RUS / KX-A142RUM / KX-A142RUS
To Next Page
Loading...
