16 RF SPECIFICATION
16.1. Base Unit
Item Value Refer to -. * Remarks
TX Power More than 20 dBm ~ 25 dBm
Adjustment (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (Base Unit) (I)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (Base Unit) (J)
RX Sensitivity < 1000 ppm
Adjustment (Base Unit) (K)
Timing Accuracy < ± 5.0 ppm
Adjustment (Base Unit) (L)
RSSI Level 0x34 hex ± A hex
Adjustment (Base Unit) (M)
* : Refer to Adjustment (Base Unit) (P.39)
16.2. Handset
Item Value Refer to -. ** Remarks
TX Power More than 20 dBm ~ 25 dBm
Adjustment (Base Unit) (I)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (Base Unit) (J)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (Base Unit) (K)
RX Sensitivity < 1000 ppm
Adjustment (Base Unit) (L)
Timing Accuracy < ± 10 ppm
Adjustment (Base Unit) (M)
RSSI Level 0x34 hex ± A hex
Adjustment (Base Unit) (N)
** : Refer to Adjustment (P.46)
17 HOW TO CHECK THE HANDSET SPEAKER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
50
KX-TCD4 10RUM / KX-TCD410RUS / KX-TCD412RU M / KX-TC D412RUS / KX-A141RUM / KX-A141RUS / KX-A142RUM / KX-A142RUS
To Next Page
Loading...
