Panasonic KX-FLB881

11. Help
68
For assistance, please visit http://www.panasonic.com/help
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
“CALL SERVICE” L There is something wrong with the unit. Contact our service personnel.
“CARRIAGE ERROR” L There is something wrong with the carriage sensor. Contact our service
personnel.
“CHANGE DRUM” L There is something wrong with the drum unit. Replace the drum unit and the
toner cartridge.
“CHECK DOCUMENT” L The document was not fed into the unit properly. Remove the document,
then press {STOP} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 86)
and try again.
“CHECK DRUM” L The drum unit is not inserted properly. Re-insert it correctly (page 9).
“CHECK PICK UP INPUT
TRAY #1”
L Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 80).
Note:
L “#1”: Paper input tray
L “#2”: Manual input tray
“CLOSE ADF COVER” L The ADF cover is open. Close it.
“DIRECTORY FULL” L There is no space to store new items in navigator directory. Erase
unnecessary items (page 39).
“DRUM LIFE LOW REPLACE
SOON”
L The drum life is near its end. Replace the drum unit as soon as possible.
“FAX IN MEMORY” L The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
88.
L If feature #442 is set to “ALWAYS” (page 56), check the connection between
the computer and the unit.
“KEEP COPYING” L Copying has stopped due to a lack of recording paper or misfeeding of
recording paper. See the other displayed message instructions to continue
copying.
“LOW TEMP.” L The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area. While the unit cannot be operated, the received
documents are temporarily stored into the memory, and will be printed out
automatically when the unit warms up.
“MEMORY FULL” L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {STOP} to clear the message. Divide the
document into sections.
“MODEM ERROR” L There is something wrong with the unit’s modem. Contact our service
personnel.
“NO FAX REPLY” L The other party’s fax machine is busy or has run out of recording paper. Try
again.