1. Introduction and Installation
16
5 Insert the paper input tray into the unit.
Note:
L If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
L If the paper input tray does not close, the plate in the
paper input tray may be lifted. Push the paper and
make sure that the paper is laid flat in the paper input
tray.
Caution for the paper input tray
L Do not drop the paper input tray.
L Hold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 2 kg when the recording
paper is fully installed.
Approx. 2 kg
FLB882CX-PFQX2773ZB-OI-en.book Page 16 Friday, October 5, 2007 11:45 AM
To Next Page
Loading...
