Panasonic KX-FLB882CX - 14 General Information; Reference Lists and Reports; Specifications

14. General Information
93
14 G ene ral In format ionPrinted Repor ts
14.1 Reference lists and reports
You can print out the following lists and reports for your
reference.
– “SETUP LIST”
– “TEL NO. LIST”
– “JOURNAL REPORT”
– “BROADCAST LIST”
– “PRINTER TEST”
L If the test print has smudges, or blurred points or
lines, clean the inside of the unit (page 88). If
printing quality is still poor, replace the toner
cartridge and drum unit.
– “CALLER ID LIST”
– “PCL FONT LIST”
– “ADDRESS LIST”
1 Press {MENU} repeatedly to display “PRINT
REPORT”.
2 Press {<} or {>} repeatedly to display the desired
item.
3 Press {SET} to start printing. i {MENU}
Specific ations
14.2 Specifications
{SET}{<}{>}
{MENU}
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Effective printing width:
A4: 202 mm
Letter/Legal: 208 mm
■ Transmission time
*1
:
Approx. 4 s/page (ECM-MMR Memory transmission)
*2
■ Scanning density:
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
Copy resolution:
Up to 600 × 600 dpi
Fax resolution:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm -in standard resolution,
7.7 lines/mm -in fine/photo resolution,
15.4 lines/mm -in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Colour Contact Image Sensor
■ Printer type:
Laser Printer
■ Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
■ Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 /
19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800
/ 2,400 bps; Automatic Fallback
■ Operating environment:
10 °C – 32.5 °C, 20 % – 70 % RH (Relative Humidity)
■ Dimensions:
Approx. height 318 mm × width 440 mm × depth 445 mm
■ Mass (Weight):
Approx. 16 kg
■ Power consumption:
Standby: Approx. 8.0 W
Preheat: Approx. 65 W
Copy: Approx. 380 W
Maximum: Approx. 950 W (When the fuser lamp turns
on)
■ Power supply:
220 – 240 V AC, 50/60 Hz
■ Memory capacity
(for operation and storing memory):
32 MB
FLB882CX-PFQX2773ZB-OI-en.book Page 93 Friday, October 5, 2007 11:45 AM