2. Preparation
18
2.2 Dialling mode
Important:
L Not available when “NEW ZEALAND” is selected in
feature #114 on page 55.
If you cannot dial (page 39), change this setting
according to your telephone line service.
1 {MENU} i {#}{1}{2}{0}
DIALLING MODE
=TONE [V^]
2 Press {1} or {2} to select the desired setting.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
3 {SET}
4 Press {MENU} to exit.
2.3 Selecting the operation mode
(Fax/Copy/Scan)
You can select the desired mode by pressing one of the
following buttons.
– {FAX}: Select this mode when using the unit as a fax
machine (page 39).
– {COPY}: Select this mode when using the unit as a
copier (page 34).
– {SCAN}: Select this mode when using the unit as a
scanner for the computer (page 31).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 56) and the timer before returning to
the default operation mode (feature #464 on page
57).
{MENU}
{SET}
FLB882CX-PFQX2773ZB-OI-en.book Page 18 Friday, October 5, 2007 11:45 AM
To Next Page
Loading...
