Panasonic KX-FP250

48
Sending Faxes
The sending report will provide you with a printed record of the fax transmission result.
One of the following choices is available.
ERROR: The sending report will print out only when fax transmission fails (pre-selected setting).
ON: The sending report will always print out, indicating whether fax transmission is successful or not.
OFF: The sending report will not print.
START/COPY/SET
Dial keypad
MENU
/
1
Press .
Display:
2
Press , then .
3
Press .
4
Press or to select the desired setting.
5
Press .
6
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET
MODE=ERROR ▼ ▲
START/COPY/SET
SENDING REPORT
0 4
1.SYSTEM SET UP
MENU
Confirmation report
01 2345678 00'51 SND
00
COMMUNICATION ERROR (43)
Jan. 20 1998 01:19PM
Jan. 20 01:18PM
SENDING REPORT
CODE
NO. USAGE TIME MODE PAGESSTART TIME RESULT
OTHER FACSIMILE
Sample of a sending report
Communication
message
(See page 78.)
Error code
(for service
personnel
use only)
SND: Sent directly.
IQ-FAX: Sent to the fax
server.
Note:
●
If your fax is not transmitted to the other party’s fax machine using the FaxSav network, the FaxSav network
will send a Non-Delivery Notice to your unit.