50
Sending Faxes
1
Insert the document FACE DOWN.
Display:
2
Press .
3
Press , then .
4
Press .
5
Press or to select “ON”.
6
Press .
7
Enter the fax number using the dial keypad,
One-Touch Dial or .
8
Press .
9
Enter the transmission start time.
Example (using the dial keypad): 11:30PM
Press , then press to select “PM”.
●
To select “AM”, press until “AM” is displayed.
Press .
Press .
●
When the programmed time arrives, the unit will
automatically start transmission.
SEND AT 11:30PM
STANDARD
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours offered by your telephone company. The delayed transmission can be
reserved to take place up to 24 hours in advance.
(sending a fax at a specific time)
Note:
●
You can receive, transmit and copy
documents while delayed transmission is set.
Delayed transmission
10
11
To cancel the delayed
transmission setting
1. Press while the unit is idle.
Display:
2. Press .
To Next Page
Loading...
