Panasonic KX-FP250

74
Receiving Faxes
Pager call - when your unit receives a fax
This feature allows your unit to call your pager when your unit receives a fax document.
START/COPY/SET
Dial keypad
MENU
SP-PHONE
/
REDIAL/PAUSE
(Pause)
How your unit and pager work
When your unit receives
a fax document, it will call
your pager company.
Your pager
company will
call your pager.
A few minutes later, your pager
will display the same message
you entered in step 6.
(For this example: 5555)
Your pager
company
5 5 55
Pager
1
Press .
Display:
2
Press , then .
3
Press .
4
Press or to select “ON”.
●
If this feature is not required, select “OFF”.
5
Press .
6
Enter your pager number.
●
You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
Your pager
number
Pauses
Your pager access
code, if required.
Message you want to see
on your pager when you
receive a fax.
NO.=
START/COPY/SET
MODE=ON ▼ ▲
MODE=OFF ▼ ▲
START/COPY/SET
FAX PAGER CALL
7 0
1.SYSTEM SET UP
MENU
7
Press .
●
The unit will dial the stored number.
8
Confirm if the message is displayed on
your pager.
9
Press .
SP-PHONE
PAGER TEST
START/COPY/SET