51
KX-FT931LA-B
8.3. Installing the Recording Paper
1. Open the top cover by pressing the top cover release but-
ton ( ).
2. Install the recording paper.
3. Insert the leading edge of the paper into the opening
above the thermal head ( ).
4. Pull the paper out of the unit.
• Make sure that there is no slack in the paper roll.
5. Close the top cover securely by pushing down on both
sides.
6. Press [FAX/START], then tear off the excess paper by
pulling it towards you.
Note:
• If the paper is secured with glue or tape, cut approxi-
mately 15 cm from the beginning of the roll before install-
ing it.
• When the power cord is connected, a message is printed
each time the top cover is opened then closed. If the
recording paper is installed upside down, the message
will not be printed. Install the paper correctly.
• For accessory information, see Optional Accessories
(P.9).
To Next Page
Loading...
