89
KX-FT931LA-B
OK means “can set”.
NG means “can not set”.
Note:
Refer to Service Function Table (P.57) for descriptions of the individual codes.
Example:
If you want to set value in the “004 Transmission report mode”, press the dial key number 1, 2 or 3 corresponding to the Set
Value you want to select. (1:ON/2:OFF/3:ERROR)
815 Sensor test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~9 mm 3 OK
874 DTMF ON time 060~200 10ms OK
875 DTMF OFF time 060~200 10ms OK
880 History list 1:SET --------- NG
881 Journal 2 1:SET --------- NG
882 Journal 3 1:SET --------- NG
961 The time transmitting the false ring back tone 01~10 x sec 05sec OK
962 The operator calling time 05~30 x sec 13sec OK
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
Code Function Set Value Default Remote Set-
ting
To Next Page
Loading...
