Panasonic KX-HTS824 - Page 48

3.3.1 Mother Board
Pin Assignments
LAN Port/WAN Port
(
10BASE-T/100BASE-TX
)
No. Signal Name Input (I)/Output (O) Function
1TPO+ O Transmit data+
2TPO- O Transmit data-
3TPI+ I Receive data+
4-5 Reserved - -
6TPI- I Receive data-
7-8 Reserved - -
LAN Port/WAN Port (1000BASE-T)
No. Signal Name Input (I)/Output (O) Function
1 TRD0 (+)
I/O
Transmit and receive data 0
(
+
)
2 TRD0 (-)
I/O
Transmit and receive data 0
(
-
)
3 TRD1 (+)
I/O
Transmit and receive data 1
(
+
)
4 TRD2 (+)
I/O
Transmit and receive data 2
(
+
)
5 TRD2 (-)
I/O
Transmit and receive data 2
(
-
)
6 TRD1 (-)
I/O
Transmit and receive data 1
(
-
)
7 TRD3 (+)
I/O
Transmit and receive data 3
(
+
)
8 TRD3 (-)
I/O
Transmit and receive data 3
(
-
)
LED Indications
Indication Colour Descri
p
tion
STATUS Green PBX status indication
• OFF: Power Of
f
• ON: Power On and running
• Flashing (60/minute): Starting up/Logging in
• Flashing (240/minute): During initialisation
• Flashing (240/minute): Wi-Fi Protected Setup (WPS) in progress
Amber PBX status indication
• ON: Ready to shutdown
• Flashing (60/minute): Shutting down
• Flashing (240/minute): Initialize switch pressed
Red PBX status indication
• ON: Alarm
The cause may be one of the following:
– Alarm for an optional service card.
• Flashing (240/minute): Initialise failed