Panasonic KX-TCD150FXB

11 RF SPECIFICATION
11.1. Base Unit
Item Value Refer to -. *
TX Power More than 20 dBm ~ 25 dBm Check Point (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/div Check Point (Base Unit) (I)
Frequency Offset -50 kHz ~ +50 kHz Check Point (Base Unit) (J)
RX Sensitivity < 1000 ppm Check Point (Base Unit) (K)
Timing Accuracy < ± 2.0 ppm Check Point (Base Unit) (L)
RSSI Level 0x34 hex ± F hex Check Point (Base Unit) (M)
*: Refer to Check Point (Base Unit) (P.23)
11.2. Handset
Item Value Refer to -. **
TX Power More than 20 dBm ~ 25 dBm Check Point (Handset) (I)
Modulation 340 kHz/div ~ 402 kHz/div Check Point (Handset) (J)
Frequency Offset -50 kHz ~ +50 kHz Check Point (Handset) (K)
RX Sensitivity < 1000 ppm Check Point (Handset) (L)
Timing Accuracy < ± 2.0 ppm Check Point (Handset) (M)
RSSI Level 0x34 hex ± F hex Check Point (Handset) (N)
**: Refer to Check Point (Handset) (P.31)
12 HOW TO CHECK THE HANDSET SPEAKER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
37
KX-TCD150FXB / KX-TCD150FXC / KX-TCD152FXB / KX-TCA115EXB / KX-TCA115EXC