91
Telephone System
Multi-Unit User Operations
Cancelling a Cordless Handset
Each cordless handset can cancel itself or other cordless handsets. This feature is
usually used to cancel a link between Cordless Handset and Base Unit.
To exit the operation, press at any time.
Cancelling a Base Unit
If a cordless handset is out of range and/or power is OFF when Cancelling a Cordless
Handset, the previous base unit number will still remain in the cancelled cordless
handset. Therefore, you need to cancel the base unit registered in the cancelled
cordless handset.
To exit the operation, press at any time.
1
Press JOYSTICK (or move).
2
Select “ Setting Base”.
3
Enter 4-digit Base Unit PIN.
(Factory Preset 0000)
4
Select “Cancel Handset”.
5
Search and press RIGHT SOFT KEY
to
attach “” to the handset(s) to cancel.
6
Press JOYSTICK.
Follow steps 1 to 3 on the previous page, then:
4
Select “Cancel Base”.
5
Enter 4-digit Handset PIN.
(Factory Preset 0000)
6
Search and press RIGHT SOFT KEY
to
attach “” to the base unit to cancel.
7
Press JOYSTICK.
8
Select “Yes”, then “Deleted” is
displayed.
535HK.book91ページ２００３年９月２２日 月曜日 午前９時１７分
To Next Page
Loading...
