Handset Settings
You can change the handset settings using a handset near the base unit.
Before proceeding with any of the main menu items listed in this chapter,
the following procedure must initially be carried out:
From the Standby mode,
ZZVV
.
ZZSS
/
UU
to select “Setting Handset”.
ZZVV
.
ZZSS
/
UU
to select main menu items from below (see menus in shaded text
boxes):
To exit the menu at any time,
ZZ
PP
.
ZZTT
or to return to previous step during programming.
2
1
3
4
(Alarm Settings):*
ZZVV
.
ZZSS
/
UU
.
ZZVV
.
ZZSS
/
UU
to select “Once”, “Repeat
Daily” or “OFF”.
ZZVV
.
To Stop Alarm
When the alarm sounds,
ZZOO
,
KK
-
II
,
__
,
LL
or
^^
.
Alarm stops and display returns to
the standby mode. If “Once” is
selected, the setting is turned off.
When in talk or intercom mode the
alarm will not sound until the call is
ended.
* For this feature to work you must
first set the Clock (see “Base Unit
Settings”).
(Select Ringer Pattern for
External Incoming call)**
To program see ** on next page.
(Select the Handset Ringer
Volume):
ZZVV
.
ZZSS
/
UU
to select Ringer Volume.
The choices are 6 levels or OFF.
ZZVV
.
If ‘OFF’ is selected, ‘Ring Off’’ is
displayed in the standby mode.
(Ringer Settings):
ZZVV
.
ZZSS
/
UU
.
Ringer Volume
Ext Ring Type
Time Alarm
Set Alarm Time
Alarm ON/OFF
Ringer Option
(Select Ringer Pattern for
Internal call)**
To program see ** on next page.
Int Ring Type
ZZVV
.
ZZKK
-
II
to enter time (4
digits) - 24 hour clock. Digits are
entered over the flashing digit.
To clear Z .
ZZYY
ZZVV
to save.
ZZSS
/
UU
to select “Once”, “Repeat
Daily” or “OFF”.
ZZVV
.
To Next Page
Loading...
