For Optional Multi-Unit Users
32 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
(Select Base Unit):
ZZVV
.
ZZSS
/
UU
to select “Auto” or a
specific base unit 1 -4 (only
registered base unit numbers are
displayed).
ZZVV
to confirm selection.
Calls (both incoming and outgoing), can
be conducted only via the selected base
unit, even if the radio cells overlap with
neighbouring base units.
Select Base
You can use your handsets as a 2-way
intercom. For example, when Handset 1
calls Handset 2:
Handset 1-
ZZNN
.
ÏÏ
is displayed.
ZZBB
(desired handset
number).
Handset 2 (ringing) -
ZZOO
,
NN
,
KK
-
II
,
LL
,
__
or
^^
to answer.
Handset 1 and 2 -
ZZPP
to end the call.
! Intercom calls can be conducted
within the radio cell of the current
base unit, but not with units in
neighbouring radio areas.
Intercom Between
Handsets
Transferring Calls to
Another Handset
The intercom can be used during a
call to transfer an external call
between handsets that are registered
to the same base unit.
For example, when handset 1
transfers a call to Handset 2:
Handset 1 -
During the call,
ZZNN
.
Ï is displayed and the call is put on
hold.
ZZBB
(desired handset
number).
A ring back tone is heard until
Handset 2 answers.*
Handset 2 (ringing) -
ZZOO
,
NN
,
KK
-
II
,
LL
,
__
or
^^
to answer.
Handset 1 & Handset 2 -
(Have conversation).
Handset 1 -
ZZPP
to release the call for
transfer
OR
ZZNN
to connect to external
caller again.
To transfer the call directly, without
speaking to the other handset:
Handset 1 -
ZZ
P at *.
Handset 2 -
ZZOO..
The transfer is complete.
If the transferred call is not answered
within 30 seconds, Handset 1 will
ring again. ZO to answer the call.
To Next Page
Loading...
