Panasonic KX-TCD775E - Set the Clock; Set the Date

Base Unit Settings
28 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
W
C/O
W
C/O
Set the Clock
ZZ__
.
Enter a new time (4 digits) (24
hour time) (
ZZKK
-
II
).
ZZYY
.
! After a mains power failure the
clock needs to be reset.
Reset the Base Unit
Set the Date
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
You can reset all of the base unit
settings to their initial factory
settings. (see ‘Base Unit Initial
Settings’).
ZZKK
.
Enter PIN.
ZZYY
.
Set Call Restriction
ZZ__
(twice).
Enter a new date (day - month-
year - 6 digits)
ZZYY
.
! After a mains power failure the
date needs to be reset.
Cancel Call Restricted
Numbers
ZZFF
.
Enter PIN.
ZZVV
.
ZZ
to cancel number.
ZZYY
.
ZZPP
to return to the standby mode.
Cancel Call Restricted
Handset(s)
ZZFF
.
Enter PIN.
ZZAA
-
FF
to select handset(s)
to cancel.
The selected handset(s) will stop
flashing.
ZZVV
.
ZZPP
to return to the standby mode.
You can restrict selected handset(s)
from dialling selected phone numbers.
You can assign up to 10 call
restriction numbers (up to 8 digits).
ZZFF
.
Enter PIN.
All registered handset numbers are
displayed.
ZZAA -- FF
to select
handset(s) to restrict.
The selected handset(s) will flash.
ZZVV
.
Enter a restriction number (max.
8 digits).
(If you misdial Z ).
ZZYY
to confirm restriction
number.
To continue entering call restriction
numbers (max. 8 digits), enter the
number, then
ZZYY
.
On completion,
ZZYY
.
! If you dial a restricted number,
the call does not connect and
restricted number flashes.
775E 21 08 02 22/8/02 11:24 am Page 28