Panasonic KX-TDA - Assigning a Voice Mail Access Key; Using a Personal Speed Dial Number for Voice Mail Access; Using an FF Key for Voice Mail Access

6. Using Additional Features
72 Issued April 2000 DBS-32-755
• You can assign an FF key for transferring callers to another extension’s
voice mail.
Using a Personal Speed Dial Number for Voice Mail Access
To assign a PSD number for voice mail access, use the procedures under
“Assigning PSD Numbers to One-Touch or Soft Keys” on page 28. (For step
4, enter the voice mail extension number.)
To retrieve a voice mail message, press the one-touch or soft key assigned to
voice mail.
Using an FF Key for Voice Mail Access
You can assign an FF key as a Voice Mail Access Key. The indicator light on
the key will flash when you have a voice message. To access your voice mail,
simply press the key.
Assigning a Voice Mail Access Key
1. Pick up the handset or press
ON/OFF
.
2. Press
PROG
.
3. Press the FF key you want to assign.
4. Press
CONF
.
5. Press
AUTO
.
6. Enter the voice mail extension number and a password (if necessary.)
Some Panasonic Voice Mail systems may require a # at the end.
For example, if your voice mail number is 500 and you are not using a
password, you would make the following entry:
ON/OFF PROG FF key CONF AUTO 500
Note:
The length of the voice mail number, including the voice mail
extension number, password, and # cannot exceed 6 digits (8 digits on
some systems).
7. Press
HOLD
.