Panasonic KX-TDA30

1.8.3 Receiving Call Waiting (Call Waiting/Off-hook Call An-
nouncement [OHCA]/Whisper OHCA)
During a conversation,
you can be informed of a call waiting with a tone or voice announcement through your
built-in speaker or handset. (Default: Disable—No call [Intercom calls]/No tone [Outside calls])
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT, refer
to "3.1.2 Settings on the Programming Mode".
OHCA:
a voice announcement through the built-in speaker
Whisper OHCA:
a voice announcement through the handset
To set/cancel for intercom calls (Manual Call Waiting)
Off-hook.
Enter 0 to 3 as you desire.
On-hook.
Enter 731.
PT/SLT/PS
No call
Tone
OHCA
Whisper OHCA
0
1
OR
2
OR
3
OR
3 17
C.Tone
To set/cancel for outside calls (Automatic Call Waiting)
Off-hook.
Enter 0 or 1.
On-hook.
PT/SLT/PS
Enter 732.
3 27
C.Tone
No tone
Tone
OR
0
1
• OHCA is only available with certain digital proprietary telephones.
• Whisper OHCA is
only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
• A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (®1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN)
Extension (KX-TDA100/KX-TDA200/KX-TDA600 only))
User Manual 129
1.8.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)