To Next PageTo Next Page
Why aren't parallel single line phones ringing on my Panasonic KX-TDA30 PBX?
If the paralleled single line telephones do not ring on your Panasonic PBX, "No ring" may be selected. Change the setting to ring.
Why is Alternate Calling not working on my Panasonic Wireless Phone?
If Alternate Calling—Ring/Voice and Live Call Screening (LCS) do not function as set when using a Panasonic Wireless Phone (KX-T7880/ KX-T7885/KX-TD7894/KX-TD7895), switch the calling mode to ring-calling and set the LCS mode to "Private". Voice-calling mode and Hands-free mode with LCS are not available with Wireless Phones.
What to do if some features do not work on my Panasonic Telephone?
If some features aren't working, system management might be restricting them, so consult your manager. Alternatively, the feature numbers may have changed, so confirm the revised number and try again.
How to fix noise on external paging on Panasonic KX-TDA30 PBX?
If you experience noise on external paging with your Panasonic PBX, it might be due to induced noise on the wire between the PBX and the amplifier. Use a shielded cable for the connection, and a short cable is recommended.
What to do if my Panasonic KX-TDA30 proprietary telephone does not have a feature button?
Some models do not have the feature button. In this case, change a flexible button to the desired button or enter the specified feature number instead of the feature button.
How to fix a poorly displayed screen on Panasonic KX-TDA30 PBX?
If the display is not shown well on your Panasonic PBX, change the Display contrast level.
What to do if Panasonic KX-TDA30 telephone buttons don't respond?
If your Panasonic PBX telephone doesn't respond when you press the buttons, it might be locked. Try unlocking it. Alternatively, if your telephone is connected to an eXtra Device Port, system programming is required; in this case, consult your dealer.
Why is my Panasonic KX-TDA30 phone displaying 'Restricted'?
If you hear a reorder tone or see 'Restricted' displayed on your Panasonic PBX phone, it could be because the telephone is locked; try unlocking it. Another reason could be that toll restriction is activated, in which case you should consult your manager or dealer. It may also be that an account code is required.
Why are some features not working on my Panasonic PBX system?
System management may restrict certain features, so please consult your manager. Also, the feature numbers might have changed, so confirm the revised number and try again.
What to do if my Panasonic KX-TDA30 shows improper operation?
If your Panasonic PBX exhibits improper operation, press the Reset Button.
General| Number of users | 52 user(s) |
|---|---|
| DECT connectable | Yes |
| Number of DECT cell stations | 4 |
| RS-232 ports | 1 |
| RJ-11 ports quantity | 2 |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 55 W |
Weight and Dimensions| Weight | 3500 g |
|---|---|
| Dimensions (WxDxH) | 275 x 117 x 376 mm |
