2.8 Connection of DECT Portable Stations — KX-TDA100/KX-TDA200
152 Installation Manual
2.8.6 After Site Survey
After obtaining the proper measurement results, exit the Radio Signal Test mode before
connecting the CS to the Hybrid IP-PBX.
1. Keep pressing POWER button on the PS until the PS is turned OFF.
2. Disconnect the AC adaptor or battery box from the CS and stop supplying electricity.
3. Switch all DIP switches on the CS from ON to OFF.
1
2
3
4
5
6
OFF ON
To Next Page
Loading...
