2.4 Installation of the Trunk Cards — KX-TDA100/KX-TDA200
Installation Manual 79
2.4.5 E&M8 Card
Function
8-port E & M (TIE) trunk card. Type 5 support.
Accessory and User-supplied Items
Accessory (included): Screws × 2
User-supplied (not included): Amphenol connector
Notes
• Connect this optional service card to the trunk through terminal board from the E & M
(TIE) line; do not connect to the trunk directly.
• To connect the Amphenol connector, refer to "2.2.10 Fastening Amphenol Type
Connector".
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1
Starting the Hybrid IP-PBX".
To terminal board from the E & M (TIE) line
LED
Amphenol
To Next Page
Loading...
