3.3 Installation of the KX-TDA Maintenance Console — KX-TDA100/KX-TDA200
212 Installation Manual
3.3.3 Hybrid IP-PBX Configuration
This section briefly describes how to check the configuration of the Hybrid IP-PBX using the
KX-TDA Maintenance Console when PC and the Hybrid IP-PBX are connected by USB cable.
For detailed descriptions of each feature and related PT programming, refer to the on-line help
at each screen.
1. Start the KX-TDA Maintenance Console
(refer to "Starting the KX-TDA Maintenance
Console and Assigning the Basic Items
(Quick Setup)" in "3.3.1 Installing and
Starting the KX-TDA Maintenance Console").
2. To check the slot condition of the Hybrid IP-
PBX:
a. Double-click "Configuration".
b. Double-click "Slot".
3. To check the PS status:
a. Double-click "Configuration".
b. Double-click "Portable Station".
4. To check other configurations, double-click
the other items in the same manner.
To Next Page
Loading...
