2.6 Installation of the Other Cards — KX-TDA100/KX-TDA200
Installation Manual 117
2.6 Installation of the Other Cards — KX-
TDA100/KX-TDA200
2.6.1 OPB3 Card
Function
Optional 3-slot base card for mounting a maximum of 3 option cards from the following:
• DPH4 card
• DPH2 card
• ECHO16 card
• MSG4 card
CAUTION
A LITHIUM BATTERY IS USED IN OPB3 CARD. THERE IS A RISK OF EXPLOSION IF
BATTERY IS REPLACED WITH THE INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
LED Indications
Indication Colour Description
CARD
STATUS
Green/
Red
Card status indication
• OFF: Power Off
• Green ON: Normal (all ports are idle)
• Green Flashing (60 times per minute): Normal (a port is in
use)
• Red ON: Fault (includes reset)
• Red Flashing (60 times per minute): Out of Service
LED