Panasonic KX-TDA30

7.3 Installation of the KX-TDA30 Maintenance Console
Installation Manual 401
7.3.4 Hybrid IP-PBX Maintenance
This section briefly describes how to perform maintenance of the Hybrid IP-PBX using the KX-
TDA30 Maintenance Console when PC and the Hybrid IP-PBX are connected by USB cable.
For detailed descriptions of each feature and related PT programming, refer to the on-line help
at each screen.
1. Start the KX-TDA 30 Maintenance Console
(refer to "Starting the KX-TDA30
Maintenance Console and Assigning the
Basic Items (Quick Setup)" in "7.3.1 Installing
and Starting the KX-TDA30 Maintenance
Console").
2. To diagnose a card:
Click "Utility" "Diagnosis" from the menu
bar.
3.
a. Click "Status" of the desired card and
change its status to "OUS".
b. Click "Card Type" of the desired card.
The diagnosis screen appears.
To use other utility commands, click the
desired item in the step 2 above.