7.3 Installation of the KX-TDA30 Maintenance Console
402 Installation Manual
File Transfer PC to PBX (SD Card) The programme files in the PC are transferred to
SD Memory Card of the Hybrid IP-PBX.
Programme files in the SD Memory Card is
overwritten in this process.
File Transfer PBX (SD Card) to PC The programme files in the SD Memory Card are
transferred to the PC.
SD Card File View and Load The name, date, time, and size of programme
files in the SD Memory Card are viewed, then
these files are transferred to each CS connected
to the Hybrid IP-PBX.
SD Card File Delete The programme files in the SD Memory Card are
deleted.
Message File Transfer PC to PBX The message files for Outgoing Messages in the
PC are transferred to all MSG cards. Available
only when at least 1 MSG card is installed.
Message File Transfer PBX to PC The message files for Outgoing Messages in the
MSG cards are transferred to the PC. Available
only when at least 1 MSG card is installed.
Error Log The error log is displayed (for details, refer to
"8.1.5 Troubleshooting by Error Log").
ISDN/Qsig Protocol Trace Displays ISDN protocol trace data of the BRI
card.
CS Information Displays the internal information of the CS.
PS Information Displays the registration information of the PS.
System Reset
Reset by the Command
Resets the connected Hybrid IP-PBX. (It is the
same as pushing the Reset Button with the
System Initialise Switch in the "NORMAL"
position.) After using this command, you have to
restart the KX-TDA30 Maintenance Console and
connect to the Hybrid IP-PBX again.
To Next Page
Loading...
