• *1 " ", "#", FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be stor-
ed.
If you do
not want to display the stored number when making a call, press the Secret (INTER-
COM) button before and after the numbers you wish to conceal.
If you store an outside party’s number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the line
access number.
<Example>
• *2 For a PF button, "2" is not required to enter before the desired number.
• *3 Depending on
the settings of your PBX, you may be required to enter delayed ringing time
(0: Immediate, 1: 1 ring, 2: 2 rings, 3: 3 rings, 4: 4 rings, 5: 5 rings, 6: 6 rings, 7: No ring). In
this case, you can automatically join a new ICD Group by creating a button for that group.
• *4 This button is not available for a PS.
• *5 0: Day/Night/Lunch/Break, 1: Day/Night/Break, 2: Day/Night/Lunch, 3: Day/Night
• *6 Availability of this button depends on the ISDN service of your telephone company. Refer
to "1.2.5 Accessing the ISDN Service (ISDN Service Access)".
• *7 This button is not available for the KX-T7665.
• *8 The button may not be available depending on the networking method in use or the settings
of the PBX.
• *9 This button is only available for KX-TDA100/KX-TDA200/KX-TDA600.
• *10 It is possible to set delayed ringing for each SDN button.
• *11 This button is only available for KX-TDA30/KX-TDA100/KX-TDA200.
• *12 This button is used for the integrated voice mail features.
• *13 The default voice mail floating extension number is 500.
• To exit at any time, lift the handset.
• You can select the parameter with the Navigator Key (Up or Down) instead of entering a num-
ber.
User Manual 207
3.1.3 Customising the Buttons
To Next Page
Loading...
