8.1.2. Description of Each Part
LED light (BATT ALARM): Turns on to indicate the dropping of the lithium battery voltage (less than 2.8V).
LED light (SD ACCESS): Turns on when the SD card is accessing.
SD card slot: Mounts the system program SD card.
Reset Switch: Press at the system reset.
System Initialize Switch:
On default startup, set the switch to the "SYSTEM INITIALIZE" position for the power ON. Return the switch to the "NORMAL"
position when the main power switch starts to flash. On normal startup, turn the power ON with the "NORMAL" position.
USB connector: B type connector. Used for the PC programming.
PAGING 1, 2: External PAGING output. Connect to the device with the built-in amplifier.
MOH 1, 2: External music on-hold input.
30
KX-TDA600BX
To Next Page
Loading...
