Panasonic KX-TDE200 Configuration Guide

2/4/2010 2
Rev2
Overview
This document describes the configuration procedures required for the KX-TDE100/200/600 and
NCP500/1000 to make full use of the capabilities of Cbeyond SIP Trunks Services.
The SIP trunks services of the TDE/NCP PBX are provided through virtual CO line cards (V-
SIPGW16) which are designed to be easily integrated into an Internet Telephony Service
provided by an ITSP (Internet Telephony Service Provider).
This guide describes the specific configuration items for the virtual SIP Gateway card in addition
to the PBX basic configuration related to SIP trunks functionality. It also describes basic Network
configuration to familiarize dealers with the network setup. It does not describe the purpose and
use of all configuration options on the virtual SIP Gateway card. For those details, see the KX-
NCP500/1000 and KX-TDE100/200/600 Programming Manual for Virtual SIP CO Line Card and
the KX-TDE100/200/600 and KX-NCP500/1000 Manuals available from Panasonic
Communication Solutio
ns.
DSP card and Activation keys
9 The PBX has to be equipped with a DSP card in order to provide
communication between the TDM side of the PBX and the SIP trunks.
9 Activation keys for SIP-Trunks has to be installed in the PBX to provide the
SIP-trunks functionality
To check the number of activation keys installed into the PBX and add new licenses
please refer to Page 12 in this guide

Panasonic KX-TDE200 Specifications

General

LED indicators	Yes
SIP extensions	128
Number of extensions	256
Number of DECT cell stations	32

Weight and Dimensions

Weight	15966.5 g
Dimensions (WxDxH)	424 x 276 x 439 mm