Getting started
11
Using the navigator key/volume key
(VOL., ?)
■ Scrolling through lists or items
By pressing this key ({^} or {V}) repeatedly, you
can scroll through (up or down) various lists or
items.
■ Adjusting the volume
By pressing this key ({^} or {V}) repeatedly, you
can adjust the receiver or speaker volume (up or
down) while talking.
■ Moving the cursor
Base unit: {^}, {V}, {7}, or {8}
Handset: {^} or {V}
By pressing the above keys repeatedly, you can
move the cursor to edit a number or name.
Soft keys
Each unit features 3 soft keys. By pressing a soft
key, you can select the feature shown directly
above it on the display.
Display
Base unit display items
Handset display items
Base unit
Handset
7 8
Item Meaning
S The line is in use.
L When flashing:
– The call is put on hold.
– The answering system is
being operated from outside
remotely.
L When flashing rapidly:
an incoming call is now being
received.
~ Ringer volume is off. (page 14)
3 Night mode is on. (page 25)
C The recording time is set to
“Greeting only”. (page 34)
$ Blocked call (page 26)
Item Meaning
w Within range of a base unit
L When flashing: Handset is
searching for the base unit.
(page 42)
S The line is in use.
L When flashing:
– The call is put on hold.
– The answering system is
being operated from outside
remotely.
L When flashing rapidly:
An incoming call is now being
received.
s Speakerphone is on. (page 13)
~ Ringer volume is off. (page 14)
3 Night mode is on. (page 25)
E Alarm is on. (page 25)
m Handset number
& Battery level
$ Blocked call (page 26)
TG106xC(e).book Page 11 Wednesday, February 25, 2009 11:13 AM
To Next Page
Loading...
