Panasonic KX-TG1061C

Getting started
12
Initial settings
Symbol meaning:
Display language
You can select either “English” or “Français”
as the display language. The default setting is
“English”.
1 {MENU} i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press the middle soft key to save.
4 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Voice guidance language
You can select either “English” or “Français”
as the voice guidance language of the answering
system. The default setting is “English”.
1 {MENU} i {#}{1}{1}{2}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2009
{0}{7} {1}{5} {0}{9}
3 {OK}
4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
{0}{9} {3}{0}
5 {AM/PM}: Select “AM” or “PM”.
6 {SAVE} i {OFF}
Note:
L When English is selected as the display
language, 12-hour clock format is used. When
French is selected, 24-hour clock format is
used.
L To correct a digit, press {^} or {V} to move the
cursor to the digit, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Symbol Meaning
= Perform with the base unit.
Y Perform with the handset.
Example:
{V}/{^}: “Off”
Press {V} or {^} to select
the words in quotations.
= Base unit / Y Handset
Y Handset
Y Handset
Y Handset
TG106xC(e).book Page 12 Wednesday, February 25, 2009 11:13 AM