Panasonic KX-TG1061C

Programming
22
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired feature code.
3 {V}/{^}: Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L The operating unit column shows the unit(s) that can be used to program the item.
=: Only the base unit can program the item.
Y: Only the handset can program the item.
=/Y: Both the base unit and handset can program the item.
L In the following table, < > indicates the default settings.
Operating
unit
Feature Feature
code
Setting System
setting
*1
Page
Y Alarm {7}{2}{0} <Off>
Once
Daily
–25
Y Answer off {3}{2}{8} – r 30
Y Answer on {3}{2}{7} – r 30
Y Auto talk
*2
{2}{0}{0} On
<Off>
–14
=/Y Block w/o num.
(Block calls without
phone number)
{2}{4}{0} On
<Off>
r 26
=/Y Call block {2}{1}{7} – r 26
=/Y Caller list {2}{1}{3} ––28
Y Check greeting {3}{0}{3} ––31
=/Y Customer support
*3
{6}{8}{0} –––
Y Date and time {1}{0}{1} – r 12
Y Deregistration {1}{3}{1} ––27
= Display language {1}{1}{0} <English>–12
Y Display
(Change language)
Français
Y Erase all msg.
(msg.: messages)
{3}{2}{5} – r 32
Y Intercom {2}{7}{4} ––37
Y Key tone
*4
{1}{6}{5} <On>
Off
––
=/Y LCD contrast
(Display contrast)
{1}{4}{5} Level 1–6 <3> – –
Y Message alert {3}{4}{0} On
<Off>
–34
Y Play all msg.
(msg.: messages)
{3}{2}{4} ––32
TG106xC(e).book Page 22 Wednesday, February 25, 2009 11:13 AM