Panasonic KX-TG1061C

Call Display Service
29
Editing a caller’s phone number
before calling back
You can edit a phone number in the caller list by
adding the long distance code “1” or removing its
area code.
1 Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: “Caller
list” i {SELECT}
2 {V}/{^}: Select the desired entry.
3 Press {EDIT} repeatedly until the phone
number is shown in the desired format.
4 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Note:
L The number edited in step 3 will not be saved in
the caller list.
Erasing selected caller information
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: “Caller
list” i {SELECT}
2 {V}/{^}: Select the desired entry.
3 {ERASE} (soft key) i {V}/{^}: “Yes” i
{SELECT}
4 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Erasing all caller information
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: “Caller
list” i {SELECT}
2 {ERASE} (soft key) i {V}/{^}: “Yes” i
{SELECT}
3 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Storing caller information in the
phonebook
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: “Caller
list” i {SELECT}
2 {V}/{^}: Select the desired entry.
L To edit the number, press {EDIT} repeatedly
until the phone number is shown in the
desired format.
3 {SAVE}
4 {V}/{^}: “Phonebook” i {SELECT}
5 Continue from step 2, “Editing entries”, page
17.
= Base unit / Y Handset
1 1 – Area code – Local phone number
Example:
2 Local phone number
Example:
3 Area code – Local phone number
Example:
= Base unit / Y Handset
1-555-321-5555
321-5555
555-321-5555
= Base unit / Y Handset
= Base unit / Y Handset
TG106xC(e).book Page 29 Wednesday, February 25, 2009 11:13 AM