Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, the interrupt tone sounds (page 41).
– Handset: To finish intercom, press MOFFN.
To answer the call, press M
N.
– Base unit: To finish intercom, place the
corded handset on the cradle. If the
speakerphone is used, press MZN. To answer
the call, lift the corded handset. If the
speakerphone is used, press MZN.
Making an intercom call
Handset
1 MMENUN a MbN: “Intercom” a MSELECTN
2 MbN: Select the desired unit. a MSELECTN
3 When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft key, if
displayed, to make intercom calls.
Base unit
1 Press MINTERCOMN.
When 2 or more handsets are registered:
MbN: Select the desired unit. a MSELECTN
R To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
2 When you finish talking, press MZN or place
the corded handset on the cradle.
Answering an intercom call
Handset
1 Press M
N to answer the page.
2 When you finish talking, press MOFFN.
Base unit
1 Press MZN or lift the corded handset to answer
the page.
2 When you finish talking, press MZN or place
the corded handset on the cradle.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press M
N, lift the
corded handset, or press MZN. When this feature
is set to “On”, the monitoring handset or base unit
for the baby monitor feature (page 47) will also
answer baby monitor calls automatically. The
default setting is “Off”.
Handset / Base unit
1 MMENUN#273
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
For assistance, visit www.panasonic.ca/english/support
27
Intercom
To Next Page
Loading...
