6 MSAVEN a MOFFN
Base unit
1 MCIDN
2 MbN: Select the entry to be blocked.
R To edit the number: Press MEDITN
repeatedly until the phone number is shown
in the 10-digit format.
3 MCALL BLOCKN
4 MbN: “Yes” a MSELECTN
5 Edit the phone number if necessary (24 digits
max.).
6 MSAVEN a MEXITN
Adding call blocked numbers manually
Handset
1 MCALL BLOCKN
2 MbN: “Block a single number” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the phone number (24 digits max.).
5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Block a single number” a
MSELECTN a MADDN
3 Enter the phone number (24 digits max.).
4 MSAVEN a MEXITN
Storing a range of number
Handset
1 MCALL BLOCKN
2 MbN: “Block range of numbers” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Block range of numbers” a
MSELECTN
3 MADDN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MEXITN
Blocking incoming calls that have no
phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
Handset / Base unit
1 MCALL BLOCKN
2 MbN: “Block unknown CID” a MSELECTN
3 MbN: Select the desired setting. a MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Setting not to ring once for blocked
call
If you do not want the unit to sound one ring for
calls from phone numbers stored in the call block
list, select “No”. The default setting is “Yes”.
Handset / Base unit
1 MCALL BLOCKN
2 MbN: “One ring for blocked call” a
MSELECTN
3 MbN: Select the desired setting. a MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Viewing/editing/erasing call block
numbers
Handset
1 MCALL BLOCKN
2 MbN: “Block a single number” or “Block
range of numbers” a MSELECTN
3 MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
4 To edit a number:
MEDITN a Edit the number. a MSAVEN a
MOFFN
For assistance, visit www.panasonic.ca/english/support
29
Call Block
To Next Page
Loading...
